DuraSeal Quick Coat Stain

$26.30

Categories: ,

Description

DuraSeal® Quick Coat Penetrating Finish is a semi-transparent stain formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal® Quick Coat Penetrating Finish is available in existing DuraSeal® colors as well as many Certified Minwax® colors. It can be used with or without a finish coat, and is compatible with all DuraSeal® water-borne and oil-modified finish systems.

Colors

Sedona Red
Sedona Red
Rosewood
Rosewood
Royal Mahogany
Royal Mahogany
Chestnut
Chestnut
Spice Brown
Spice Brown
Ebony
Ebony
Medium Brown
Medium Brown
Coffee Brown
Coffee Brown
Golden Brown
Golden Brown
Antique Brown
Antique Brown

 

 

 

 

Neutral
Neutral
Nutmeg
Nutmeg
True Black
True Black
Heritage Brown
Heritage Brown
Aged Barrel
Aged Barrel
Dark Gray
Dark Gray
Rustic Beige
Rustic Beige
Silvered Gray
Silvered Gray
Jacobean
Jacobean
Espresso
Espresso

 

 

 

 

Classic Gray
Classic Gray
Dark Walnut
Dark Walnut
Weathered Oak
Weathered Oak
Gunstock
Gunstock
Golden Pecan
Golden Pecan
Fruitwood
Fruitwood
Colonial Maple
Colonial Maple
Cherry
Cherry
English Chestnut
English Chestnut
Early American
Early American

 

 

 

 

Red Mahogany
Red Mahogany
Special Walnut
Special Walnut
Golden Oak
Golden Oak
Provincial
Provincial

Additional information

SURFACE PREPARATION

1. Properly prepare surface according to NWFA approved methods.

2. Use a No. 100 grit screen [80 grit for 201 White] for the final sanding cut.

3. Remove all dust with a broom and/or vacuum and tack surface with a clean towel moistened with mineral spirits.

APPLICATION

1. Shake material thoroughly before and occasionally during use. Apply to a small test area before proceeding with the entire job to ensure desired color. If desired, DuraSeal® Quick Coat Penetrating Finish #110 Neutral can be used to lighten any standard DuraSeal® wood tone.

2. Apply the first coat of DuraSeal® Quick Coat Penetrating Finish liberally with a brush, lambswool applicator or cloth at approximately 500 square feet per gallon.

3. Allow to penetrate for 5-8 minutes, then remove excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat.

4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat (step 3 above).

5. Allow the final coat to dry at least 2 hours and apply a DuraSeal® finish coat of your choice.